INSTALLATION

• Inspect the site for installation.

• The modules can operate up to 1/2" air gap; maintain close center-to-center alignment between the sensor and target magnet (see orientation note).

• MAGNASPHERE concealed sensors may be installed directly into steel doors and frames.

• For the MSS-19C, drill .75" dia. x 1.125" deep holes for both the sensor and magnet modules.

• For the MSS–25C, drill 1" dia. x 1.25" deep holes for both the sensor and magnet modules.

• Connect the leads to the system.

• Secure both modules by coating the diameter and flange with RTV compound and inserting them into the drilled holes.

ORIENTATION NOTE

Modules are sensitive in one direction. The set should be installed with center-to-center alignment within 3/16”.

 

>>